CELDAS SOLARES SENSIBILIZADAS BASADAS EN ZnO CON DIFERENTES TAMAÑOS DE NANOPARTÍCULA

Autores/as

  • K.1 Moreno-Laguna 1. Universidad Juárez Autónoma de Tabasco, Avenida Universidad S/N, Zona de la Cultura, Col. Magisterial, Villahermosa, Centro, Tabasco 86040, México
  • A.2 G. Vega-Poot 2. Departamento de Física Aplicada, CINVESTAV-IPN, Mérida, Yucatán 97310, México
  • E.1 Ramírez-Morales 1 Universidad Juárez Autónoma de Tabasco, Avenida Universidad S/N, Zona de la Cultura, Col. Magisterial, Villahermosa, Centro, Tabasco 86040, México
  • L.1 Rojas-Blanco 1 Universidad Juárez Autónoma de Tabasco, Avenida Universidad S/N, Zona de la Cultura, Col. Magisterial, Villahermosa, Centro, Tabasco 86040, México
  • M.1 González-Solano 1 Universidad Juárez Autónoma de Tabasco, Avenida Universidad S/N, Zona de la Cultura, Col. Magisterial, Villahermosa, Centro, Tabasco 86040, México
  • D.1 Martínez-Hernández 1 Universidad Juárez Autónoma de Tabasco, Avenida Universidad S/N, Zona de la Cultura, Col. Magisterial, Villahermosa, Centro, Tabasco 86040, México
  • G.1* Pérez-Hernández 1 Universidad Juárez Autónoma de Tabasco, Avenida Universidad S/N, Zona de la Cultura, Col. Magisterial, Villahermosa, Centro, Tabasco 86040, México

DOI:

https://doi.org/10.19136/jeeos.a2n1.2694

Palabras clave:

Tamaños de nanopartículas, ZnO, DSSC, microondas

Resumen

Una manera novedosa de fabricar celdas solares sensibilizadas por colorante (DSSC) se realiza empleando diferentes tamaños de nanopartículas (NPs) de óxido de zinc (ZnO) de ~20 nm (NPs-m) y ~35 nm (NP-M), sintetizadas por la técnica de microondas asistida, mediante la modificación de distintas condiciones de operación y reacción. Las NPs- m se usaron como película activa y de transporte, mientras que las NPs-M, como película dispersora de luz. Estas configuraciones dieron como resultado que las DSSC´s con doble capa de ZnO con NPs-m y NPs-M, presenten un mejor factor de forma (FF) de 0.61 comparado con las DSSC de una capa de NPs -m. Los valores de eficiencia (?) determinados estuvieron en el rango de 2.77% a 2.11 %.

Citas

Azimah O. & Huda A. (2014). Electron transport analysis in zinc oxide-based dye-sensitized solar cells: A review. Renewable and Sustainable Energy Reviews, 31: 140-157. DOI: 10.1016/j.rser.2013.11.031

Mathew S., Yella A., Gao P., Humphry-Baker R., Curchod B. F. E., Ashari-Astani N., Tavernelli I., Rothlisberger U., Nazeeruddin M. K., Grätzel M. (2014). Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers. Nature Chemistry: 242-247. DOI: :10.1038/NCHEM.1861

O'Regan B. & Grätzel M. (1991). A low-cost, high-efficiency solar cell based on dye-sensitized collodal TiO2 films. Nature, 353: 737-746.

Kumar R., Umar A., Kumar G., Singh-Nalwa H., Kumar A., Akhtar M. S. (2017). Zinc oxide nanostructure-based dye-sensitized solar cells: Review. J Mater Sci, DOI: 10.1007/s10853-016-0668-z.

Krishnapriya R. Praneetha S. & Murugan V. (2015). Energy efficient, microwave-hydro-/solvothermal synthesis of hierarchical flowers and rice-grain like ZnO nanocrystals as photoanodes for high performance dye-sensitized solar cells. CrystEngComm, 17, 8353-8367. DOI: 10.1039/C5CE01438G

Sun H., Sun L., Sugiura T., White M. S., Standler P., Sariciftci N. S., Masuhara A & Yoshida T. (2017). Microwave-assisted Hydrothermal Synthesis of Structure-controlled ZnO nanocrystals and their properties in Dye-sensitized solar cells. Electrochemistry, 85(5): 253-261. DOI:10.5796/electrochemistry .85.253

Pfau M. W., Kunzmann A., Segets D., Peukert W., Wallace G. G., Officer D. L., Clark T., Costa R. D. & Guldi M. D. (2017). Choosing the right nanoparticle size - designing novel ZnO electrode architectures for efficient Dye-Sensitized Solar Cells. J. Mater. Chem. A, 5: 7516-7522. DOI: 10.1039/C6TA11012F

Ong C. B., Ng Y. L. & Mohammad A. W. (2018). A review of ZnO nanoparticles as solar photocatalysts: Synthesis, mechanisms and applications. Renewable and Sustainable Energy Reviews, 81, 536-55. DOI: 10.1016/j.rser.2017.08.020

Moreno-Laguna K., Ramírez-Morales E., Rojas-Blanco L., Álvarez-Ramírez J. G., González-Solano M., Pérez-Hernández G & Vega-Poot A.G. (2018). Effect of temperature and water in as precursor of oxygen synthesis ZnO by microwave.

Lizama-Tzec F. I., García-Rodríguez R., Rodríguez-Gattorno G., Canto-Aguilar E. J., Vega- Poot A.G., Heredia-Cervera B.E., Villanueva-Cab J. Morales-Flores N., Pal U. & Oskam G. (2016). Influence of morphology on the performance of ZnO-based dye-sensitized solar cells. RSC Adv, 6: 37424-37433. DOI: 10.1039/c5ra25618f

Al-Gaashani R., Radiman S., Tabet N., Razak-Daud A.(2011). Effect of microwave power on the morphology and optical property of zinc oxide nano-structures prepared via a microwave-assisted aqueous sol

ution method. Materials Chemistry and Physics, 125: 846-852. DOI: 10.1016/j.matchemphys.2010.09.038

Barreto G. P., Morales G., López-Quintanilla, M. L. (2013). Microwave Assisted Synthesis of ZnO Nanoparticles:Effect of Precursor Reagents, Temperature, Irradiation Time, and Additives on Nano-ZnO Morphology Development. Hindawi: 1-11 DOI: http://dx.doi.org/10.1155/2013/478681

Brus L.E.(1984) Electron-electron and electronhole interactions in small semiconductor crystallites: The size dependence of the lowest excited electronic state. J. Chem. Phys, 80: 4403 -4409. DOI: 10.1063/1.447218

Descargas

Publicado

2018-08-06

Cómo citar

Moreno-Laguna, K., Vega-Poot, A. G., Ramírez-Morales, E., Rojas-Blanco, L., González-Solano, M., Martínez-Hernández, D., & Pérez-Hernández, G. (2018). CELDAS SOLARES SENSIBILIZADAS BASADAS EN ZnO CON DIFERENTES TAMAÑOS DE NANOPARTÍCULA. Journal of Energy, Engineering Optimization and Sustainability, 2(1), 41-54. https://doi.org/10.19136/jeeos.a2n1.2694

Número

Sección

ARTÍCULO CIENTÍFICO